Participaciones en Congresos

 

2018

  • A. Salas-Barenys, N. Vidal, J. Sieiro, J.M. López-Villegas, B. Medina-Rodríguez, F. Ramos, Fabrication of Full-3D Printed Electronics RF Passive Components and Circuits, PRIME 2018 (14th Conference on PhD Research in Microelectronics and Electronics).

2017

  • J.M. Lopez-Villegas, N. Vidal, J. Sieiro, A. Salas, B. Medina-Rodríguez, F. Ramos, Electromagnetic characterization of 3D printed Conical Inductors for RF Applications, IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP). 2017
     
  • A. Salas, N. Vidal, J. Sieiro, J.M. Lopez-Villegas, B. Medina-Rodríguez, F. Ramos, Full-3D Printed Electronics Process Using Stereolitography and Electroless Plating, Design of Circuits and Integrated Systems Conference. DCIS2017.
     
  • M. Morales, M. Torrell, D. Rodríguez, S. Anelli, A. Morata, M.C. Monterde, F. Ramos, J.A. Calero, A. Tarancón, Development of a High Temperature Co-Electrolyser Stack of fuel electrode supported Solid Oxide Cells fabricated by aqueous multilayered tape-casting and metallic interconnects by powder metallurgy, Aportando Valor al CO2, . Tarragona, Spain, May 2016. Poster.
     
  • A. Garcia-Miquel, B. Medina-Rodriguez, N. Vidal, F.M. Ramos, E. Roca, J. M. Lopez-Villegas, Design and Characterization of a Miniaturized Implantable UHF RFID Tag Based on LTCC Technology, European Conference on Antennas and Propagation (EuCAP), Paris (France). March 2017.
  • J.Gonçalves, E.Xuriguera, M.Blanes, F.M.Ramos, A.Cirera, Additive manufacturing of Aqueous Alumina Suspensions by Direct Ink Writing, Young Ceramists Additive Manufacturing Forum (yCAM), Berlin, Germany, March 2017. Oral presentation.
  • A. Muguruza Blanco, J. Bonada, Agustín Gómez,  J. Minguella-Canela, J. Fernandes, F. Ramos, E. Xuriguera, A. Varea, A. Cirera, Development of a Multimaterial Additive Manufacturing Process for Electronic Devices, 7th Manufacturing Engineering Society International Conference (MESIC), Vigo, Spain, June 2017. Oral presentation.
  • J.Gonçalves, M.Blanes, A. Muguruza,  J. Bonada, E.Xuriguera , A. Gómez , J. Minguella-Canela, F.Ramos, E. A. Cirera, Additive manufacturing of functionalized LTCC ceramic material for electronic devices, 15th Conference & Exhibition of the European Ceramic Society (ECerS2017), Budapest, Hungary, July 2017. Poster.
  • D.R. Vidal, A. Morata, A. Tarancón,V. Esposito, C. Chapout, J. C. Ruiz-Morales, P. Gooden, D. Lieftink, A. Ansar, F. Ramos, Solid Oxide Fuel Cells electrolytes fabrication by stereolithography technologies, 15th Conference & Exhibition of the European Ceramic Society (ECerS2017), Budapest, Hungary, July 2017. Poster.
  • D.R. Vidal, F. Ramos, M. Cólera, I.Carrilero, P.Merino, C.Merino, Ceramic Functionalized Flow Batteries Electrodes for Urban Electric Micro-vehicles, 15th Conference & Exhibition of the European Ceramic Society (ECerS2017), Budapest, Hungary, July 2017. Poster.
 

2016

  • D. Rodríguez, B. Colldeforns, M. Torrell, M.Blanes, F.Ramos,A.Tarancón, Fabrication of anode supported multilayer tape casted Solid Oxide Fuel Cells: Performance and long term operation characterization, Fuel Cell Science and Technology Conference, . Glasgow, Scotland, March 2016. Oral presentation.
     
  • D. Rodríguez, B. Colldeforns, M. Torrell, M.Blanes, F.Ramos,A.Tarancón, Characterization of the performance and long term degradation of anode supported multilayered tape cast Solid Oxide Cells, European Fuel Cell Forum, Lucerne, Switzerland, July 2016. Oral presentation.
     
  • M.Blanes, J. Gonçalves, F. Ramos-Pérez, L. Goyos, A. Fernández. SPS sintering of multilayer ceramic-CNF composites prepared by aqueous Tape Casting for electrical ceramics applications
    Electroceramics XVI, Limoges, June 2016, France
  • D. Rodríguez, B. Colldeforns, M. Torrell, M.Blanes, F.Ramos,A.Tarancón, Fabrication of anode supported multilayered tape casted Solid Oxide Fuel Cells: Mechanical, electrochemical and long term characterization, World Hydrogen Energy Conference, Zaragoza, June 2016. Poster.
     
  • B. Medina-Rodriguez, F. M. Ramos, J. M. Lopez-Villegas, N. Vidal, J. Sieiro, A. Cirera, Customizable Printed Inductors on LTCC Substrates for RF Applications, Design of Circuits and Integrated Systems Conference (DCIS), Granada, November 2016. Oral presentation.
  • S. Ahyoune, J.M. Lopez-Villegas, J. Sieiro, N. Vidal, F. Ramos, Effects of Shielding Structures onthe Performance of Planar Inductors, (DCIS), Granada, November 2016. Oral presentation.
     
  • E. Bailo, M. Colina, I. Becerril, L. Acebo, M. Placidi, E. Saucedo, B. Medina Rodríguez, M. Blanes, F.M. Ramos, A. Cirera and A. Perez-Rodriguez. Na and Ge doping effect on CZTS absorber cells fabricated by ink-jet printing, study and comparison with PVD. EU PVSEC, Munich, June 2016. Oral presentation.
     
  • J.Fernandes, E.Xuriguera, M.Blanes, F.M.Ramos, A.Cirera, Optimization of the rheological properties of aluminium oxide suspensions for extrusion-based 3D printing, 6th International Conference on Shapping of Advanced Ceramics, Montpellier, France, July 2016. Poster.
     
  • J.Fernandes, E.Xuriguera, M.Blanes, F.M.Ramos, A.Cirera, Optimization of the rheological properties of LTCC suspensions for DLP-based 3D printing, 6th International Congress on Ceramics, Dresden, Germany, August 2016. Poster.

2015

  • Aleix Garcia-Miquel, Neus Vidal, Jose López-Villegas, Javier Sieiro, Francisco Ramos. “Miniaturization Effects on Implantable Antennas for Biomedical Applications", EuCAP’2015, Lisbon, Portugal on 12-17 April 2015
     
  • Neus Vidal, Aleix Garcia-Miquel, Jose López-Villegas, Javier Sieiro, Francisco Ramos. “Influence of Phantom Models on Implantable Antenna Performance for Biomedical Applications”, EuCAP’2015, Lisbon, Portugal on 12-17 April 201.
     
  • E. Bailo, M. Blanes, E. Gómez, E. Valles, F. Ramos. Copper Electroless on polymeric substrates and/or carbon nanofibber. XXXVI RRSEQ Vigo 13-15 July of 2015. Oral presentation 
     
  • D. R. Vidal, M.Torrell, B. Colldeforns, A.Tarancón, F.Ramos. CuO based anodes in anode supported solid oxide fuel cells.  14th International Conference European Ceramic Society Toledo 21-25 June of 2015. Oral presentation.
  • B. Medina-Rodríguez, M. Colina, I. Becerril, L. Acebo, M. Placidi, D. Sylla, Y. Sanchez, R. Kondrotas, E. Bailo, M. Blanes, F. Ramos, A. Cirera, E. Saucedo and A. Perez-Rodriguez. Cu2ZnSnSe4 based solar cells fabricated by ink-jet printing. International Conference on Solution Processed Innovative Solar Cells (SPINS15). Santiago de Compostela 09-11 September 2015. Oral presentation.S. López-Marino, M. Espindola-Rodriguez, Y.
  • Sánchez, X. Alcobé, H. Xie, M. Neuschitzer, M. Colina, V. Izquierdo-Roca, A. Pérez-Rodríguez, E. Saucedo, E. Bailo, M. Blanes and F. Ramos. Cu2ZnSnSe4 solar cells fabricated onto flexible steel substrates: the effect of alkali doping. European Congress and Exhibition on Advanced Materials and Processes EUROMAT 2015. Warsaw (Poland) 20-14 September. Poster.
  • S. López-Marino, M. Espindola-Rodriguez, Y. Sánchez, X. Alcobé, H. Xie, M. Neuschitzer, S. Giraldo, M. Colina, E. Bailo, M. Blanes, F. Ramos and E. Saucedo. Efficiency improvement of Cu2ZnSnSe4 based solar cells by a back contact modification. European Congress and Exhibition on Advanced Materials and Processes EUROMAT 2015. Warsaw (Poland) 20-14 September. Highlight Oral Presentation.
  • B. Medina-Rodríguez, M. Colina, I. Becerril, L. Acebo, M. Placidi, D. Sylla, Y. Sanchez, E. Bailo, M. Blanes, F. Ramos, A. Cirera, E. Saucedo and A. Perez-Rodriguez. Record solar efficiency for CZTSe solar cells fabricated by ink-jet printing technology. Progress in Applied Surface, Interface and Thin Film Science 2015 (SURFINT-SREN IV). Florence (Italy) 23-26 November 2015. Oral presentation.
  • D. R. Vidal, M.Torrell, B. Colldeforns, M.Blanes A.Tarancón, F.Ramos. Fabrication of anode supported multilayer tape casted Solid Oxide Fuel Cells: Performance and ageing characterization. European Fuel Cell Technology & Applications Conference - Piero Lunghi Conference. Naples (Italy) 16-18 December. Oral presentation.


 

2014

  • B.Medina-Rodriguez, G.Vescio, E.Xuriguera, A.Varea, F.Ramos, A.Cirera. 
    Device fabrication, performances and aging of flexible gas sensor platforms.
    EMRS 2014 Spring Meeting, Lille, France, Mayo 2014.
     
  • B.Medina-Rodriguez, N. Bonet, F. Ramos. 
    Fabrication of a flexible microfluidic sensor. 
    EMRS 2014 Spring Meeting, Lille, France, Mayo 2014.
     
  • E. Xuriguera, O. Monereo, C. López-Gándara, N. Bonet, F. M. Ramos, A. Cirera.
    Suitability of doped SnO2 nanofibers for exhaust gas sensor.
    EMRS 2014 Spring Meeting, Lille, France, Mayo 2014.
     
  • B.Medina-Rodriguez, G.Vescio, E.Xuriguera, A.Varea, N.Bonet, F.Ramos, A.Cirera. 
    Fabrication of Flexible Sensor Platforms by Inkjet-Printing (poster).
    VI Jornada IN2UB, Barcelona, Junio 2014.
     
  • B.Medina-Rodriguez, T. Castillo, J.M. García, F. Ramos, A. Cirera.
    Study of electrical and mechanical properties of silver nanowires-carbon nanofibers hybrid composites. 
    The 3th International Conference  on Competitive Materials and Technology Process (Ic-cmtp3), Miskolc, Hungría, Octubre 2014.
 

2013

  • J. M. Fernández-Sanjuán, N. Bonet, J G. Rodríguez, F M. Ramos, J. Sieiro, J. M. López-Villegas, N. Vidal,  A. Cirera. 
    Ceramic Capacitive Pressure Sensor based on LTCC Technology. 
    Spanish conference on electron devices
    (CDE), IEEE 2013
     
  •  N. Vidal, J. M. Lopez-Villegas, S. Curto, J. Colomer, S. Ahyoune, A.Garcia, J.J. Sieiro, and F.M. Ramos.
    Design of an Implantable Broadband Antenna for Medical Telemetry Applications.
    EuCAP, Goteborg, Abril 2013
     
  •  J. López-García, W. Ohm, X. Fontané, F. Ramos, W. Ludwig, S. Gledhill, M. Ch. Lux-Steiner, E. Saucedo, A. Pérez-Rodriguez. 
    CuInSe2 thin films obtained by screen printing of nanoparticle based inks on sulfurized ZnO nanorod.
    E-MRS, Strasbourg, Mayo 2013.
     
  •  Francisco Ramos, Mireia Blanes, Anna Amell, Joseba Esparza, Marta Martínez and Luis Antonio Díaz. 
    Material and process characterization of Carbon -Silicon Carbide composites prepared by tape casting and sintered by field assisted sintering technique. 
    ECERS, Limoges, Junio 2013.
     
  •  M. Blanes, X. Garcia, Francisco M. Ramos. 
    Free-sintering of anode supported NiO-8Y single cells obtained by aqueous Tape Casting (Poster). 
    ECERS, Limoges, Junio 2013.
     
  • C. López-Gándara, J.M. Fernández-Sanjuán, X.G. Capdevila, F.M. Ramos, A.Cirera. 
    Influence of porous layers in the behaviour of YSZ-based electrochemical exhaust gas sensors. 
    Euromat, Sevilla, septiembre 2013.
     
  • M. Blanes, X.G. Capdevila, R. Stefanov, F.M. Ramos. 
    Obtaining YbScSZ substrates by aqueous tape casting for SOFC applications. 
    Euromat, Sevilla, septiembre 2013.
     
  • X.G. Capdevila, C. López-Gándara, J.M. Fernández-Sanjuán, M.Blanes, A. Cirera, F.M. Ramos. 
    Electrical performance of cermet electrodes for gas sensors. 
    Euromat, Sevilla, septiembre 2013.
     
  • F. M. Ramos, M. Blanes, A. Amell, J. Esparza, M. Martínez, J.A. García, R. Rodríguez and L.A. Díaz.
    Tribological Properties of Nanostructured C/C-SiC Composites
    WTC 2013, Turín, Septiembre 2013
     
  •  F. Ramos. FAE, I+D+i
    Motor del cambio en una PIME.
    Barcelona Global Energy Challenges. Barcelona, Junio 2013. 

2012

  • N. Vidal, S. Curto, J. M. Lopez-Villegas, J. Sieiro, and F. M. Ramos.
    Detuning Effects on Implantable Antenna At Various Human Positions.
    EUCAP 2012 (European Conference on antennas and propagation), Marzo 2012.
     
  • F.A. Pulgarín, A. Fairbrother, E. García-Hemme, V. Izquierdo-Roca, B. Pina, F. Ramos, A. Carreté, A. Cabot, P.J Sebastian, E. Saucedo, A. Pérez-Rodríguez, J.R. Morante.
    “Printing of photovoltaic grade CuIn(S1-ySey)2 layers from nanoparticle-based inks: understanding the crystallization of different printable precursors”.
    MRS Spring Meeting, San Francisco, USA, Abril 2012.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera,
    Estimation of the triple phase boundary length in porous electrodes of electrochemical cells before and after polarization. 
    E-MRS Spring Meeting, Strasbourg, Mayo 2012.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera,
    How to test oxygen sensors? Influence of gas testing systems and experimental artifacts in exhaust gas sensors characterization. 
    Eurosensors, Cracovia, Septiembre 2012.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, M.Blanes, F.M.Ramos, A.Cirera,
    Modelling and optimization of diffusive layers in potentiometric and amperometric electrochemical gas sensors. 
    Eurosensors, Cracovia, Septiembre 2012.

2011

  • F.Afsar, M.Blanes, T.Carrasco, A.Cirera, J.M.Fernández-Sanjuán, F.Giordano, C.López-Gándara, J.M.López-Villegas, J.G.Macias, F.M.Ramos, J.Sieiro, N.Vidal.
    A low temperature cofired ceramic (LTCC) technology platform for heterogeneous integrated systems. 
    Conferencia de Dispositivos Electrónicos 9-11/02/2011, Palma de Mallorca.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera.
    Effect of nanostructured WO3 layers in the sensitivity to nitrogen monoxide in YSZ-based electrochemical sensors. 
    Conferencia de Dispositivos Electrónicos 9-11/02/2011, Palma de Mallorca.
     
  • C. López-Gándara, S. Nazarpour, F. M. Ramos, A. Cirera. 
    A ToF-SIMS analysis on the contamination of an exhaust gas sensor's protective coating after real ageing conditions. 
    EMRS 2011 Spring Meeting, Nice, France, May 2011.
     
  • E.. Saucedo, A. Shavel, V. Izquierdo-Roca, X. Fontané, B. Pina, A. Cabot, A. Pérez-Rodríguez, J.R. Morante, F. Ramos.
    Nanoparticle based inks for the synthesis of photovoltaic grade CuInS2: Comparative analysis of layers synthesized using different kinds of nanoparticles.
    Presentado como contribución oral en la Billateral E-MRS-MRS Energy Meeting (Nice, France, May 2011)

  • X. Fontané, A. Fairbrother, D. Sylla, V. Izquierdo-Roca, E. Saucedo, A. Cabot B. Pina, M. Blanes, F. Ramos, A. Pérez-Rodríguez, J.R. Morante. New strategies for low cost CIGS PV technologies based on chemical processes. Aceptado (póster) en la “VI Conference Barcelona Global Energy Challenges” (Barcelona, Junio 2011)
     
  • C.F Gutiérrez-González, A. Fernandez, B.Pina, M.Blanes, F.Ramos, S.López-Esteban.
    Processing of mullite powders for solar cells substrates.
    Póster presentado en el V congreso internacional sobre materiales de mullita (Avilés, Mayo 2011)
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera.
    Can Three Phase Boundary Sites Be Quantified? a Theoretical and Experimental Approach to Validate Porous Electrodes. 
    Eurosensors, 5-7/09/2011, Athens, Greece.
     
  • Beatriz Pina.
    Comportamiento PTC en composites de nanofibras de carbono preparados mediante tecnologia tape casting. 
    Winter Meeting SoftMatPol IEM (CSIC) 22 Diciembre 2011, Madrid.
     
  • Beatriz Pina, Francisco M. Ramos, Mireia Blanes, Tiberio Ezquerra, C.Merino, Albert Cirera.
    PTC behavior of carbon nanofiber composites prepared by tape casting technology. 
    IV Jornada IN2UB, Col·legi de Metges de Barcelona 20 de Noviembre, Barcelona. 

2010

  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera.
    Influence of electrode polarization and the interface electrode-electrolyte on the current-voltage response of YSZ-based sensors. 
    European Materials Research Society Metting, 09-13/06/2010, Strasbourg, France.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera.
    Role of nanostructured WO3 in ion conducting sensors for the detection of NOx in exhaust gases from lean combustion engines. 
    European Materials Research Society Metting, 09-13/06/2010, Strasbourg, France.
     
  • S.Nazarpour, C.López-Gándara, F.M.Ramos, A.Cirera.
    Tetragonal metastable phases in YSZ doped with alumina. 
    European Materials Research Society Metting, 09-13/06/2010, Strasbourg, France.
     
  • C.López-Gándara, J.M.Fernández-Sanjuán, F.M.Ramos, A.Cirera.
    Effect of nanostructured WO3 layers in the sensitivity to nitrogen monoxide in YSZ-based electrochemical sensors. 
    Eurosensors, 08-10/09/2010, Linz, Austria.

2009

  • F.M.Ramos, C.López-Gándara, A.Cirera, J.R.Morante.
    Monolithic Ceramic Technology for Sensing Devices. 
    Conferencia de Dispositivos Electrónicos, 11-13/02/2009. Santiago de Compostela, Spain.
     
  • C.López-Gándara, F.M.Ramos, A.Cirera, A.Cornet,
    Modelling the response of limiting current ceramic oxygen sensors. 
    European Materials Research Society Metting, 08-12/06/2009, Strasbourg, France.
     
  • F.M.Ramos, C.López-Gándara, A.Cirera, J.R.Morante.
    Monolithic ceramic technology for gas sensor substrates: an alternative to silicon substrates. 
    European Materials Research Society Metting, 08-12/06/2009, Strasbourg, France.
     
  • C.López-Gándara, F.M.Ramos, S.Nazarpour, A.Cirera, A.Cornet.
    Quantitative Model of the Behavior of the Limiting Current Oxygen Sensors. 
    Eurosensors, 07-09/09/2009, Lausanne, Switzerland.
     
  • F.M.Ramos, C. López, J.M. Fernández, M. Blanes, J. Sieiro, J.M. López-Villegas, A. Cirera.
    A Monolithic HTCC & LTCC Ceramic Technology for Embedded RadioFrequency Circuitry, Gas Sensing and Microfluidics. 
    Ibernam, 18-19/11/2009, Sevilla, Spain.

2008

  • F.M.Ramos, C.López-Gándara, A.Cirera, J.R.Morante.
    A monolithic ceramic technology for nanostructured material sensors. 
    Ibernam 2008, Tarragona, Spain.